fokielectronics.blogg.se

Masstransit 1103
Masstransit 1103




masstransit 1103
  1. #Masstransit 1103 code
  2. #Masstransit 1103 download

The mechanic should be careful when removing the sensor so as not to damage the connecting wiring, which is delicate. In addition, before reinstalling the air filter, the mechanic should remove and clean the MAF sensor with a CRC 05110 spray cleaner.If the air filter is dirty upon inspection, the mechanic should replace it with a new one.In addition to repairing and replacing items, the mechanic should check for any loose wiring and connectors. Replace any faulty or damaged wiring, connectors, or components within the MAF sensor wiring harness.

#Masstransit 1103 code

Repairing a P1103 trouble code requires a mechanic to do the following: Because of this, it is recommended that you deal with a P1103 trouble code as soon as possible. The reduced fuel efficiency also leads to more costs when putting fuel into the vehicle. While a vehicle can still operate with a P1103 trouble code stored, the erratic running condition of the engine and the subsequent stalling while idling can make the vehicle difficult to drive. The result is that the problem is not fixed and the code returns.

masstransit 1103

Once all of the necessary repairs are made, the mechanic should clear the code and retest the system to see if the code returns.Ĭommon mistakes when diagnosing the P1103 codeĪ mistake common to P1103 trouble code diagnosing is for the mechanic to replace the MAF sensor without checking the wiring for fault, damage, or looseness.The mechanic should also test the continuity between the MAF sensor circuit and the PCM. If there is no voltage or ground signal at the MAF sensor, the mechanic should disconnect the PCM and check the continuity of the MAF sensor and circuit with the battery ground.If the code returns, they should use a digital volt/ohm meter to test the voltage and ground signal of the MAF sensor.Then they should clear the code after fixing any leaks and see if the code returns.

#Masstransit 1103 download

  • If the code returns, the mechanic should first download any freeze frame data and stored trouble codes and then perform a smoke test to check for leaks within the vacuum system using an evaporative smoke tester.
  • Next, once all components are cleaned, repaired, or replaced, the mechanic should clear the code and test the system, with the vehicle running, to see if the code returns.
  • masstransit 1103

  • While the mechanic has the air filter out, they should carefully remove the MAF sensor for cleaning with a CRC 05110 spray cleaner.
  • Remove the air filter and determine if it needs replacing.
  • The mechanic is looking for any damaged, loose, or faulty wiring, connectors, or components when doing this inspection.
  • Inspect all wiring, connectors, and components associated with the MAF sensor, including the wiring harness.
  • Once the mechanic has the necessary equipment, they need to perform the following steps: To diagnose the P1103 trouble code, a mechanic needs to use an advanced scanner, an evaporative smoke tester, and a digital volt/ohm meter. How does a mechanic diagnose the P1103 code? In addition, a vehicle can suffer from reduced fuel efficiency from the conditions that cause a P1103 trouble code. Symptoms of a P1103 trouble code include stalling when idling, an erratically running engine, and reduced power while accelerating.

    masstransit 1103

    A clogged MAF sensor screen or a dirty or bad MAF sensor are some other likely causes of a code storage. In addition to this, a leak in the vacuum system, either before or after the MAF sensor, can cause the PCM to store this code. What causes the P1103 code?Ī common cause of a P1103 trouble code is faulty or loose wiring and connectors within the MAF sensor wiring harness. If the PCM receives a voltage signal from the MAF sensor that is higher than what the manufacturer has specified but the signal still falls within established parameters, a P1103 trouble code is stored and the check engine light illuminates. The MAF sensor sends data to the PCM in the form of a voltage signal. In addition to a P1103 trouble code, other related codes the PCM might store include a P1100, P1101, P1102, and P1104 code. The Powertrain Control Module (PCM) stores a P1103 trouble code when the voltage signal from the Mass Air Flow (MAF) sensor is higher than normal but still falls within the range specified by the manufacturer.






    Masstransit 1103